puristusyhdistelmässä

Puristusyhdistelmässä is a Finnish term that translates to "in a compression combination" or "in a press fit assembly." It refers to a mechanical joint where two parts are joined together by interference. One part, typically a shaft or pin, is slightly larger than the hole it is intended to fit into. When the parts are assembled, the shaft is pressed or forced into the hole. This creates a tight, friction-based connection that holds the parts together without the need for fasteners like screws or rivets.

The success of a puristusyhdistelmässä relies on precise manufacturing tolerances for both the shaft and the hole. The amount of interference, the difference in dimensions between the shaft and the hole, is crucial. Too little interference will result in a loose joint, while too much can lead to damage to the parts during assembly or excessive stress. Heating the outer part or cooling the inner part can be employed to facilitate assembly by expanding or contracting the components, respectively.

This type of joint is common in engineering applications where a strong and durable connection is required. Examples include fitting bearings into housings, attaching gears to shafts, or assembling engine components. The puristusyhdistelmässä offers a clean and robust solution, providing high radial strength and good resistance to vibration and torque. Disassembly can often be achieved by applying significant force or by using heat to overcome the interference.